Touch and contactless control
The panel responds to a hand approaching within 15 mm.
LightSwitch (2-gang/2-way) Jeweller
Two lighting circuits. Two control locations.
Two lighting circuits. Two control locations.
Control two lighting circuits from two locations with a double two-way switch configuration. The large panel responds to touch or a hand approaching within 15 mm, and the device status is available in the Ajax app.
No neutral wire
Powered from the phase wire, subject to a suitable circuit.
Model-specific load
5–300 W per segment; 600 W total. Lamp type and wiring must also be suitable.
Ajax app control
Check the lighting state and switch remotely.
Automation scenarios
Use schedules, alarms, and system events to control lighting.
Soft LED backlight
Find the panel in the dark; configure the backlight in the app.
Lighting that follows your routine
Set lighting to switch on according to a schedule or turn off when arming the system. Alarm scenarios can coordinate the light with other compatible Ajax devices.
App control and automation require a compatible Ajax hub and a configured system. CHM checks the exact hub, software, and extender combination before installation.
A coordinated finish
Choose from eight panel colours: White, Fog, Grey, Graphite, Ivory, Oyster, Olive, and Black. Matching frames can combine devices into one coordinated installation.
Frames are available for two to five devices. Horizontal and vertical layouts require the corresponding components; combinations with smart outlets are horizontal.
Select the right components
Select LightCore (2-gang/2-way), matching two-gang/two-way touch panels, and the corresponding second switches for the circuit. The wiring and connected load must be checked for each segment.
Relays, panels, and frames are separate components. CHM will list the required parts in your quotation, including suitable low-load compensation where required by the manual.
Installation and setup
CHM checks the mounting box, existing wiring, lamp compatibility, and circuit loading before installation. The device is designed for indoor use and is installed by a qualified specialist.
Pairing is performed through the Ajax app. The installer tests radio communication, touch response, and each lighting circuit before handover.
Technical overview
| Lighting load | 5–300 W per segment; 600 W total |
|---|---|
| Control | Touch, contactless panel, Ajax app, automation scenarios |
| Radio range | Up to 1,100 m in an open space |
| Installation | Indoor; no neutral wire required |
| Panel colours | Eight; select compatible panel and frame components |
For complete installation requirements and current specifications, use the official documents below.
Official documentation
- Ajax product page
- User manual
- Technical specifications
- Check exact device compatibility
- Ajax switches and outlets configurator
Discuss your installation with CHM
Contact CHM Security for a model-specific configuration, installation assessment, and quotation for your property in Cyprus.