Touch or contactless control
A large sensitive panel with response to an approaching hand.
LightSwitch (1-gang) Jeweller
Smart touch 1-gang light switch
Comfort and security in a touch
Control a lighting circuit from the touch-sensitive panel, through the Ajax app, or with automation scenarios. The panel also responds when a hand comes within 15 mm, and its soft LED backlight helps you find the switch in the dark.
Key features
No neutral wire required
Designed for installation using the power phase, in the European 55 mm form factor.
5–600 W lighting loads
Low-power lamps may require the supplied capacitor; suitability depends on the lighting device.
Up to 1,100 m
Jeweller radio communication in an open space. Actual range depends on the building.
App control and scenarios
Manage lighting remotely and automate it by schedule or system events.
Current and temperature protection
Built-in electrical protection and configurable settings in the Ajax app.
Lighting control wherever you are
Check the light’s state in the Ajax app and switch it on or off remotely. Set an automatic switch-off timer, or disable the touch panel with childproofing while keeping app control available.
Automation for everyday routines
Schedule lighting to simulate presence while you are away. Configure scenarios to switch lights when the system is armed, or in response to an intrusion or fire alarm. Scenario operation requires a compatible Ajax system and the relevant connected devices.
Eight colours. A coordinated interior.
Choose White, Fog, Grey, Graphite, Ivory, Oyster, Olive, or Black. Combine matching switches and outlets in compatible frames to suit the installation.
The correct horizontal or vertical relay, touch panel, and frame must be selected together.
Build the right switch configuration
A standalone 1-gang switch uses a LightCore (1-gang) relay and a SoloButton (1-gang) touch-sensitive panel. Combined installations use suitable SideButton and CenterButton panels with a compatible Frame.
Components are purchased separately. CHM will specify the required relay, panel, frame, and accessories for your installation.
Reliable communication with your Ajax system
LightSwitch communicates through the encrypted Jeweller radio protocol. Hub and range extender compatibility must be checked for the exact model and system version before installation.
Professional installation and setup
CHM can assess the existing wiring, mounting box, lamp type, load, and Ajax system compatibility. LightSwitch is intended for indoor installation. Electrical installation must be performed by a qualified specialist.
For lamps below approximately 5 W, the supplied capacitor may need to be connected in parallel with the lamp, following the manufacturer’s instructions.
Discover LightSwitch
Watch the official Ajax product introduction on YouTube.
Watch the Ajax videoOfficial documentation
Plan your lighting with CHM
Contact us for a configuration and installation quotation for your property in Cyprus.